Last time I shared with you how to install a wire feeder of the laser welding machine. Today we will learn how to control the wire feeder on the control panel.

                                                                        Don’t worry, the control panel can be changed to English mode

A. The number on the homepage shows the wire feeding speed, which can be adjusted by the up and down keys. Please keep it running when using it.

B. Manual wire feeding: After pressing and holding, the wire feeder will start wire feeding, and the manual wire feeding speed depends on the background setting.

C. Manual withdrawal: After pressing and holding, the wire feeder starts to withdraw, and the manual withdrawal speed depends on the background setting.

D. After all settings on the setting page are completed, click to save.

E. The wire feeding speed on the setting page is the default wire feeding speed, that is, after changing here, When turning on again it will remain unchanged.

F. Start-up delay: Keep the default value unchanged.

G. Withdrawal length and wire length: set according to actual usage.

Don’t worry, the control panel can be changed to English mode

When the wire feeding is stopped, the system will first retract a certain distance and then feed the wire a certain distance. This function is mainly used for wire breakage.

When the wire is still outside at the beginning of each welding, please set the withdraw length to be greater than the Feeding length.

Hope that after today's sharing, everyone can understand the wire feeder of laser welder. PES Laser has been committed to laser welding equipment for many years, providing customers with more advanced and high-quality products.