With the continuous development of laser welding machines, it is widely used in various industries, because it has very good welding efficiency, it has gradually replaced the traditional welding equipment. In order to use our welding machine correctly, what do we need to pay attention to?

1. Before the welding work, the laser welding machine should be inspected for normal operation. After the operation, the welding machine and the working site should be inspected to eliminate hidden dangers and ensure safety and no accidents.

2. The handheld welding machine can work with 220V single-phase power or 380V three-phase power.The grounding wire must be connected well. Otherwise, the machine cannot be used.

3. Before using the laser welding machine, please make sure that pure water or distilled water has been injected into the chiller, check if the water level of the chiller meets the requirements.

In the process of large-scale movement and transportation, the chiller should be completely discharged to prevent water seepage, leakage, and splashing on the circuit board, and the welding machine will be damaged due to this.

4. If the fiber laser welding machine is not used for a long time, it is necessary to drain the water in the chiller to avoid damage to the laser.

5. When the power is suddenly disconnected during normal work, turn off the power switch of the welding machine in time, and then turn on the welding machine to work after the power supply is stable.

6. When the welding torch is connected to the welding machine, the control line, water line, and air pipe must be tightened in place. The welding torch, various connecting lines and laser fiber must be fixed at the work site. At the same time, do not fold, hard pull or step on the fiber.

7. The welding torch should be kept clean during work. Before each use of the welding torch, please use a clean soft brush to remove impurities and foreign objects, and then use a dust-free cloth, industrial alcohol or acetone to wipe carefully and gently.