-
What do we need to pay attention to for laser welding machine?
May 25 , 2021
With the continuous development of laser welding machines, it is widely used in various industries, because it has very good welding efficiency, it has gradually replaced the traditional welding equipment. In order to use our welding machine correctly, what do we need to pay attention to? 1. Before the welding work, the laser welding machine should be inspected for normal operation. After the...
Read More
-
4th generation welding gun introduction
Jun 03 , 2021
Today let’s talk about the fourth-generation welding gun of the fiber laser welding machine. It has 6 wobble welding modes, one cutting mode, and it can also clean the weld (small area). Let us first understand the assembly parts of the welding torch： 1. Nozzle: Customer can change the corresponding nozzle according to different welding processes, and can twist the copper nozzle to adjust the foca...
Read More
-
What are the components of the laser welding machine from PES LASER
Jun 08 , 2021
With the continuous improvement of people's technological requirements, traditional welding can no longer meet the needs of customers. The emergence of a new generation of laser welding machines has promoted the development of welding technology.However, many people are still not clear about the components of the laser welding machine. Let me explain which components are needed for the fiber laser...
Read More
-
The 6 modes of the 4th generation welding gun
Jun 10 , 2021
Many customers are curious about what exactly are the 6 welding modes of the fourth-generation laser welding machine. Today we will discuss the welding mode of the 4th-generation welding gun. The welding gun can weld, cut, and clean the weld (small area). It can also be welded with welding wire to ensure welding quality. First of all, let’s take a look at the 6 welding modes. W...
Read More
-
The meaning of the buttons and parameters on the panel of the laser welding machine
Jun 15 , 2021
Many customers who bought our laser welding machines before have feedback that they are a bit vague about the buttons and parameters on the control panel of the fiber laser welding machine. Today, let me explain to you the meaning of the buttons and parameters on the panel of the laser welding machine. The signal status is displayed on the control panel: 1.FGAP Control of laser switch. When in nor...
Read More
-
The difference between the 4th generation and the 5th generation welding torch
Jun 17 , 2021
With the advancement of science and technology, our company is also innovating and constantly developing new fiber welding machine to meet the needs of the market. According to the needs of customers, new improvements have been made to the welding torch. Let us first get familiar with the advantages of the fifth-generation welding gun. Basic features: the self-developed control system with multipl...
Read More
-
How to use the handheld laser welding machine correctly
Jun 22 , 2021
Preparation before starting Check power supply Check PE cable of the machine is completely grounded Check the machine is connected to protective gas(Argon or nitrogen) The new laser welding machine needs to add distilled water or pure water, check the water level of the chiller meets the requirements About the operator 1.PPE such as laser protective glasses and gloves are required during operation...
Read More
-
Maintenance of fiber laser chiller in summer
Jun 24 , 2021
In our daily work, it will inevitably produce dust. The water in the fiber laser chiller will also produce impurities, which will affect the work of the fiber welder. The working scene of the fiber laser chiller is very harsh. In order to ensure the good performance of the equipment and prolong the service life of the laser welding equipment, the equipment needs to be maintained. The frequency of ...
Read More
IPv6 network supported 
